H3C Technologies H3C MSR 2600 - Manual (Page 20)

13
Router model Dimensions Requirements for the rack
MSR 26-00-17
• Height—44.2 mm (1.74 in), 1RU
• Width—360 mm (14.17 in)
• Total depth—443.5 mm (17.46 in)
{
Chassis depth—323.5 mm (12.74 in)
{
Power cord-connecting depth—60
mm (2.36 in)
{
E1 cable-connecting depth—60 mm
(2.36 in)
• Depth—More than 0.6 m (1.97 ft)
• Distance from the front post to front
door—No less than 80 mm (3.15 in)
• Distance from the front post to rear
door—No less than 380 mm (14.96 in)
To install the router in a rack:
1. Use a mounting bracket to mark the positions of cage nuts on the front rack posts, making sure the
cage nuts on the two front rack posts are at the same level.
Figure 7 Marking the positions of cage nuts
2. Insert one edge of a cage nut into the hole. Use a flat-blade screwdriver to compress the other edge
of the cage nut, and then push the cage nut fully into the hole.