beautypg.com

H3C Technologies H3C MSR 2600 User Manual

Page 40

background image

33

Figure 40 Setting the serial port used by the HyperTerminal connection

3.

Set Bits per second to 9600, Data bits to 8, Parity to None, Stop bits to 1, and Flow control to None,
and click OK.

4.

To restore the default settings, click Restore Defaults.

Figure 41 Setting the serial port parameters

5.

Select File > Properties in the HyperTerminal window.

See also other documents in the category H3C Technologies Routers: