beautypg.com

Installing the router on a wall – H3C Technologies H3C MSR 2600 User Manual

Page 22

background image

15

Figure 10 Securing the router to the rack

Installing the router on a wall

1.

Mark the locations of the two mounting holes on the wall.
Make sure the holes are level and the distance between the two holes is 240 mm (9.45 in).

2.

Drill the two holes at least 22 mm (0.87 in) deep.

3.

Hammer a wall anchor into each hole until the anchor is flush with the wall.

4.

Torque a screw into each anchor. Leave at least 1.5 mm (0.06 in) between the screw head and the
wall.

5.

Hang the router on the screws.
Make sure the network ports face downwards and the sides with air vents are perpendicular to the
ground.

See also other documents in the category H3C Technologies Routers: