H3C Technologies H3C MSR 2600 - Manual (Page 17)

10
Installing the router
Installing the router on a workbench
IMPORTANT:
•
Ensure good ventilation and 10 cm (3.94 in) of clearance around the chassis for heat dissipation.
• Do not place heavy objects on the router.
To mount the router on a workbench:
1. Make sure the workbench is clean, stable, and correctly grounded.
2. Place the router upside down on the workbench and attach the rubber feet to the four round holes
in the chassis bottom.
Figure 3 Attaching the rubber feet
3. Place the router on the workbench with the upside up.
Figure 4 Mounting the router on a workbench
Installing the router in a rack
WARNING!
The mounting brackets can only support the weight of the router. To avoid damage to the router, do not
place any objects on the router.