H3C Technologies H3C MSR 2600 - Manual (Page 44)

37
Startup process
After power-on, the router initializes its memory, and then runs the extended BootWare. The console
terminal screen displays the following information:
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU...
Booting Normal Extended BootWare
The Extended BootWare is self-decompressing....Done.
****************************************************************************
* *
* H3C MSR26-30 BootWare, Version 1.07 *
* *
****************************************************************************
Copyright (c) 2004-2013 Hangzhou H3C Technologies Co., Ltd.
Compiled Date : May 6 2013
CPU ID : 0x1
Memory Type : DDR3 SDRAM
Memory Size : 1024MB
Flash Size : 2MB
Nand Flash size : 256MB
CPLD Version : 2.0
PCB Version : 3.0
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
Loading the main image files...
Loading file flash:/msr26-cmw710-system-e0006p05.bin........................
...Done.
Loading file flash:/msr26-cmw710-security-e0006p05.bin...Done.
Loading file flash:/msr26-cmw710-voice-e0006p05.bin....Done.
Loading file flash:/msr26-cmw710-data-e0006p05.bin....Done.
Loading file flash:/msr26-cmw710-boot-e0006p05.bin............Done.
Image file flash:/msr26-cmw710-boot-e0006p05.bin is self-decompressing......
.....Done.
System image is starting...
Line aux0 is available.
Press ENTER to get started.
Press Enter, and the following prompt appears:
This prompt indicates that the router is ready to configure.