H3C Technologies H3C MSR 50 - Manual (Page 30)

22
Configuring Track
Track overview
The Track module works between application and detection modules, as shown in Figure 9 . It shields the
differences between various detection modules from application modules.
Collaboration is enabled after you associate the Track module with a detection module and an
application module. The detection module probes specific objects such as interface status, link status,
network reachability, and network performance, and informs the Track module of detection results. The
Track module sends the detection results to the associated application module. When notified of changes
for the tracked object, the application modules can react to avoid communication interruption and
network performance degradation.
Figure 9 Collaboration through the Track module
Collaboration fundamentals
The Track module collaborates with detection modules and application modules:
• Collaboration between the Track module and a detection module
• Collaboration between the Track module and an application module
Collaboration between the Track module and a detection module
The detection module sends the detection result of the associated tracked object to the Track module.
Depending on the result, the Track module changes the status of the track entry:
• If the tracked object functions correctly, for example, the target interface is up or the target network
is reachable, the state of the track entry is Positive.
• If the tracked object does not function correctly, for example, the target interface is down or the
target network is unreachable, the state of the track entry is Negative.
• If the detection result is not valid, for example, the network quality analyzer (NQA) test group that
is associated with the track entry does not exist, the state of the track entry is Invalid.
The following detection modules can be associated with the Track module: