H3C Technologies H3C MSR 50 - Manual (Page 19)

11
output the trap messages and the output destinations). For the information center configuration, see
Network Management and Monitoring Configuration Guide.
To enable BFD trap:
Step Command Remarks
11. Enter system view. system-view N/A
12. Enable BFD trap. snmp-agent trap enable bfd
Optional.
Enabled by default.
For more information about the
command, see the snmp-agent
trap enable command in Network
Management and Monitoring
Command Reference.
Displaying and maintaining BFD
Task Command Remarks
Display information about
BFD-enabled interfaces.
display bfd interface [ verbose ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Display information about enabled
BFD debugging.
display bfd debugging-switches [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Display BFD session information.
display bfd session [ verbose ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Clear BFD session statistics. reset bfd session statistics Available in user view.