H3C Technologies H3C S7500E Series Switches - Manual (Page 53)

5-10
If b-node is specified for the client, you do not need to specify any WINS server address.
Configuring the BIMS Server Information for the Client
A DHCP client performs regular software update and backup using configuration files obtained from a
branch intelligent management system (BIMS) server. Therefore, the DHCP server needs to offer
DHCP clients the BIMS server IP address, port number, shared key from the DHCP address pool.
Follow these steps to configure the BIMS server IP address, port number, and shared key in the DHCP
address pool:
To do… Use the command… Remarks
Enter system view system-view —
Enter DHCP address pool view
dhcp server ip-pool pool-name
[ extended ]
—
Specify the BIMS server IP
address, port number, and shared
key
bims-server ip ip-address [ port
port-number ] sharekey key
Required
Not specified by default.
Configuring Gateways for the Client
DHCP clients that want to access hosts outside the local subnet request gateways to forward data. You
can specify gateways in each address pool for clients and the DHCP server will assign gateway
addresses while assigning an IP address to the client. Up to eight gateways can be specified in a
DHCP address pool.
Follow these steps to configure the gateways in the DHCP address pool:
To do… Use the command… Remarks
Enter system view system-view —
Enter DHCP address pool view
dhcp server ip-pool pool-name
[ extended ]
—
Specify gateways gateway-list ip-address&<1-8>
Required
No gateway is specified by default.
Configuring Option 184 Parameters for the Client with Voice Service
To assign voice calling parameters along with an IP address to DHCP clients with voice service, you
need to configure Option 184 on the DHCP server. For information about Option 184, refer to Option
184 .