H3C Technologies H3C S7500E Series Switches - Manual (Page 104)

10-3
To do… Use the command… Remarks
Clear the information of dynamic IPv6
domain name cache
reset dns ipv6 dynamic-host Available in user view
IPv6 DNS Configuration Examples
Static Domain Name Resolution Configuration Example
Network requirements
As shown in Figure 10-1 , static domain name resolution is configured on the Switch and thus the
Switch can use the domain name host.com to access the host whose IPv6 address is 1::2.
Figure 10-1 Network diagram for static domain name resolution
Configuration procedure
# Configure a mapping between host name host.com and IPv6 address 1::2.
system-view
[Switch] ipv6 host host.com 1::2
# Enable IPv6 packet forwarding.
[Switch] ipv6
# Use the ping ipv6 host.com command to verify that the Switch can use static domain name
resolution to resolve domain name host.com into IPv6 address 1::2.
[Switch] ping ipv6 host.com
PING host.com (1::2):
56 data bytes, press CTRL_C to break
Reply from 1::2
bytes=56 Sequence=1 hop limit=128 time = 3 ms
Reply from 1::2
bytes=56 Sequence=2 hop limit=128 time = 1 ms
Reply from 1::2
bytes=56 Sequence=3 hop limit=128 time = 1 ms
Reply from 1::2
bytes=56 Sequence=4 hop limit=128 time = 2 ms
Reply from 1::2
bytes=56 Sequence=5 hop limit=128 time = 2 ms
--- host.com ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 1/1/3 ms