H3C Technologies H3C S9800 Series Switches - Manual (Page 80)

72
LED Status Description
Off The switching fabric module is powered off.
ACTIVE LED
The ACTIVE LED indicates the active and standby working mode of the switching fabric module.
Table 36 ACTIVE LED description
LED Status Description
ACTIVE
Steady green
The switching fabric module is operating in
active mode.
Off
• The switching fabric module is operating in
standby mode.
• The switching fabric module is faulty.
Management Ethernet port LEDs
For description about the management Ethernet port LEDs, see " Management Ethernet port LEDs ."
LPU LEDs
SFP+ port LED
Each SFP+ port has a status LED to show the port operating status and activities.
Table 37 SFP+ port LED description
LED Status Description
SFP+ port LED
Flashing green
The SFP+ port is sending or receiving data at 10
Gbps.
Flashing orange
The SFP+ port is sending or receiving data at 1
Gbps.
On A link is present on the SFP+ port.
Off No link is present on the SFP+ port.
QSFP+ port LEDs
Each QSFP+ port has a status LED to show the port operating status and activities.
Table 38 QSFP+ port LED description
LED Status Description
QSFP+ port LED
(one-to-one
connection)
Flashing The QSFP+ port is sending or receiving data.
On A link is present on the QSFP+ port.
Off No link is present on the QSFP+ port.
QSFP+ port LED
(one-to-four
Flashing A minimum of one link is sending or receiving data.
On A minimum of one link is present on the QSFP+ port.