H3C Technologies H3C S9800 Series Switches - Manual (Page 39)

31
Figure 38 Installing an LPU on the S9804 switch
(1) LPU-pushing direction (2) Ejector lever-closing direction
(3) Screw-tightening direction
Figure 39 Installing an LPU on the S9810 switch
(1) LPU-pushing direction (2) Ejector lever-closing direction
(3) Screw-tightening direction
Verifying the installation
After you complete the installation, verify that:
• There is enough space for heat dissipation around the switch.
• The grounding cable is connected correctly.
• The power modules are as required.
• The power cords are connected correctly.