H3C Technologies H3C S9800 Series Switches - Manual (Page 62)

54
Appendix A Chassis views and technical
specifications
The H3C S9800 Switch Series includes the S9804 and S9810 models.
• The S9804 switch includes a fixed component main processing unit and FRUs, including LPUs, fan
trays, and power modules.
The main processing unit performs overall control and switching for the switch. The specifications
for the main processing unit are as follows:
{
Processor: MIPS64 (dual-core) @ 1.2 GHz.
{
SDRAM: 4 GB DDR3 SDRAM.
{
Flash: 512 MB (NOR flash).
{
NVRAM: None.
• The S9810 switch includes switching fabric modules, LPUs, fan trays, and power modules. All these
components are FRUs.
The switching fabric modules perform overall control and switching for the switch. For
specifications for the switching fabric modules, see the manuals of the switching fabric modules.
For more information about the FRUs, see " Appendix B FRUs and compatibility matrixes ."
The main processing unit, LPUs, and switching fabric modules are also referred to as "cards" in this
document.
Chassis views
S9804
Figure 58 Front view
(1) LPU slots 1 and 2 (2) LPU slots 3 and 4
The switch comes with filler panels in all LPU slots except slot 0. In the figure, the LSV1QGS12SA1 LPUs
are installed in the LPU slots.
1
2