ARM Electronics JHD - Manual (Page 7)

JPEG2000 Stand alone DVR User Guide
- 7 -
10.[PTZ]
Press [PTZ] to enter the PTZ control mode. Press the PTZ buttons to control the PTZ camera directly.
11.[+ / -]
Adjust set-up value.
Adjust display orders of channel.
12.[Control]
SEQ/AUDIO- Press quickly for AUDIO, and press and hold for 3 seconds to enter SEQ mode.
SEQ -Full screen sequencing or the smaller screen sequencing in PIP mode.
AUDIO- Press to play the audio, and press again to go to the next audio channel.
PIP- To enter the Picture in Picture mode from full screen mode.
NEXT- Go to the next PTZ command in PTZ mode.
Go to the next channel in full screen display and the next page in split screen display.
ZOOM- To enlarge the picture. Use the direction buttons and move to the area to be enlarged.
13.[REC]
To activate Emergency Record at continuous, Super fine quality and Best resolution. Press STOP to exit the
Emergency Record mode.
14.[STOP]
Stop the emergency record and return to the record schedule programmed in the Record Setup.
Stop playback and return to the LIVE mode.
15.[SEARCH]
Enter the Search dialog window to search by percentage, date / time, or the event list.
16.[PLAY]
Play the recorded video beginning from the end of previous playback.
17.[FREEZE]
Freeze in full screen or split screen
18.[J.SHUTTLE Button]
Activate the Jog Shuttle and press again to deactivate