ARM Electronics JHD - Manual (Page 44)

JPEG2000 Stand alone DVR User Guide
- 44 -
5-2 PTZ camera operation
Use MENU and NEXT key to select a PTZ command, and [+] [-] to select the
channel. Then, press PTZ key to enter the PTZ control mode.
X
Indicate the channel connected with a PTZ camera.
Y
Indicate PTZ command, press ENTER to send control code by PTZ key.
You can also press the PTZ button on the front panel, and use the front panel
pre-assigned PTZ function keys to control the PTZ camera.
[Operate by PTZ control keys]
After entering PTZ control mode, PAN/TILT function can be controlled by direction keys and pre-assigned PTZ
function keys.