ARM Electronics JHD - Manual (Page 25)

JPEG2000 Stand alone DVR User Guide
- 25 -
4-1 Log-In
4-1-1 DVR LOG-IN
Press MENU to login DVR system.
Use CH. SELECTORS 1~0 to key in the password.
Then press ENTER or click to confirm and enter the system. Click
Exit.
Erase the wrong password by PIP key.
※ Default password:
ADMIN: blank (No default password. Press ENTER key directly to enter the
system)
4-1-2 SYSTEM MENU
1.[DISPLAY SETUP]
Includes SCREEN DISPLAY, MONITOR SETUP (VGA SETUP)
2.[CONFIGURATION]
Includes HDD MANAGEMENT, TIME/DATE SETUP, CAMERA SETUP,
INTERVAL SETUP, ALARM SETUP, BUZZER SETUP, PASSWORD SETUP,
and SYSTEM INFORMATION.
3.[RECORD SETUP]
Includes RECORD CONFIGURATION, SCHEDULE SETUP, and HOLIDAY.
4.[BACK-UP]
Recorded data back up via CD-RW or USB device.
5.[EXTERNAL DEVICE]
TCP/IP SETUP, RS232C SETUP, PAN-TILT SETUP, and AUDIO SETUP.
6.[FACTORY DEFAULT]
Reset the DVR to factory defaults.
7.[LANGUAGE]
Change the OSD language.
CHAP.4 Set Up
Caution:
1. It is strongly suggested to change the password after the initial setup. Please keep records of
your passwords. Rebooting the DVR and resetting the factory defaults will not reset the
password to the default.
2. Please contact your reseller if you forget the password.
3. The DVR will exit the Login screen and return to LIVE automatically if there is no action taken
for 4 seconds.