ARM Electronics JHD - Manual (Page 65)

JPEG2000 Stand alone DVR User Guide
- 65 -
Upgrade firmware
Update procedures
Update F/W
1. Connect the USB port between DVR and PC.
(Do not power on DVR in advance)
1. Select ALLUPDATE then choose the file: _ALLUPDATE_4J_NTIC_noboot_V1.3.bin
2. Press and hold SEARCH and PLAY and power on the DVR
3. When the DVR is turned on, you will hear very short beeps. Keep holding the “SEARCH” and “PLAY” buttons.
When the beeps turn slow and the “Send” icon of the program, J2000 USB Downloader, becomes active, release
the buttons.
4. Click “SEND” to transmit the files. The DVR automatically reboots after the file transmission is completed.
Congratulations, you have finished the update.
update F/W
Start
Update F/W
Finish Finish the update procedures
Start to update