ARM Electronics JHD - Manual (Page 56)

JPEG2000 Stand alone DVR User Guide
- 56 -
6-6-2 Back up via Client software
[Save the recorded video as single JPEG picture]
Press “STOP” right before where you want to save and
press “SAVE”.
The picture will be saved to the assigned path which
you set up in [Remote software setup] f [PTZ/SAVE]
[print the recorded data]
Press “STOP” and “PRINT” to print out the picture.
[SAVE AS AVI]
During playback, press “RECORD” to start saving to AVI
and press “RECORD” again to stop. A message “Saving
OK” pops up when you successfully save the video to
AVI.