ARM Electronics JHD - Manual (Page 47)

JPEG2000 Stand alone DVR User Guide
- 47 -
6-2-2 DVR SETUP
The functions listed below can be changed over network: CONFIGURATION，RECORD， EXTRNAL DEVICE.
6-3 J2K BACKUP process
1.[Backup Information]
IP Address: Enter the IP address of DVR.
Network Port: Enter the port of DVR.
User ID: Enter “Admin”.
User Password: Enter Admin’s password.
Save File Path: Set a path to save the backup file (This function is active only when the connection is
established)
Start Backup Time: The start time of file backup (This function is only active under the connection is
established”)
End Backup Time: The end time of file backup (This function is only active under the connection is established”)
2.[Function setup]