AML M2500 Decoder - Manual (Page 49)

45
3) BETWEEN TRACKS/FIELDS TERM CHARACTER
The CHARACTER to be output is defined from the
TERMINATION CHARACTER option. The default is a
carriage return (ENTER).
ON Transmit the TERMINATION CHARACTER between
each track/field which is read. The insertion location
is according to the following:
a) IF the SEND ALL TRACK DATA option is ON,
the character will be inserted between TRACKS.
b) IF the SEND ALL TRACK DATA option is OFF,
the character will be inserted between FIELDS.
OFF * Do not transmit the BETWEEN TRACKS/FIELDS
TERMINATION CHARACTER.
4) SEND ENDING TERMINATION CHARACTER
The CHARACTER to be output is defined from the
TERMINATION CHARACTER option. The default is a
carriage return (ENTER).
ON * Transmit the TERMINATION CHARACTER after all
data has been sent.
OFF Do not transmit the ENDING TERMINATION
CHARACTER.
5) STRIP SPACES
(This option valid only if SEND ALL TRACK DATA is OFF.)
ON * All spaces will be stripped from the ACCOUNT
NUMBER FIELD, and any leading or trailing spaces
will be stripped from the NAME FIELD.
OFF Do not strip any spaces from the mag stripe data.