AML M2500 Decoder - Manual (Page 42)

38
BAUD RATE
The baud rate sets the data transmission speed for the serial interface
port on the reader. The reader’s baud rate must match the terminal.
Select one of the following:
0) 150
1) 300
2) 600
3) 1200
4) 2400
5) 4800
6)* 9600
7) 19,200
8) 38,400
PARITY
Sets the parity for the serial interface data. This setting must match the
terminal. Select one of the following:
0)* NONE
1) EVEN
2) ODD
3) MARK
DATA BITS
Sets the character length (number of data bits per character) for the
serial interface data. This setting must match the terminal. Select one
of the following:
0) 7 BITS
1)* 8 BITS