AML M2500 Decoder - Manual (Page 36)

32
INTERLEAVED 2 OF 5
0) I 2 OF 5 DECODER
ON* Enable reading INTERLEAVED 2 of 5 labels.
OFF Disable reading INTERLEAVED 2 of 5 labels.
1) CHECK DIGIT: 0=NONE, 1=USS, 2=OPCC
Specifies which type of check digit will be used with INTERLEAVED
2 of 5:
0* = NONE (no check digit required)
1 = UNIFORM SYMBOLOGY SPECIFICATION
(3-1-3 MOD 10)
2 = OPTICAL PRODUCT CODE COUNCIL
(2-1-2 MOD 10)
2) SEND CHECK DIGIT
ON Transmit the INTERLEAVED 2 of 5 check digit with
the bar code data.
OFF* The check digit is not transmitted.
3) FIXED LENGTH
ON Read only FIXED LENGTH INTERLEAVED 2 of 5
bar code labels that match the lengths defined in
options #4 & #5 below. The check digit can be on or
off.
OFF* Disable FIXED LENGTH mode. Read all
INTERLEAVED 2 of 5 labels without regard to length.
4) SET FIXED LENGTH #1 (02-60)
Sets the first valid FIXED LENGTH for Interleaved 2 of 5.
Scan a two digit value to enter the length. Valid lengths
are 02 to 60 characters. By definition, the length of
Interleaved 2 of 5 labels are an even number of characters.
The default FIXED LENGTH is 6 characters.
5) SET FIXED LENGTH #2 (02-60)
Sets a second valid fixed LENGTH for Interleaved 2 of 5.
Scan a two digit value to enter the length. The default
length is set to 0 characters (i.e. the second FIXED
LENGTH is disabled).