AML M2500 Decoder - Manual (Page 19)

15
SCANNING WITH THE MS941 TRIGGERLESS LASER
The MS941 is a triggerless laser activated by a bar code or reflective object
passing through its beam. It can be set in its cradle for "hands-free"operation, or
held in the hand.
See the following steps for scanning instructions:
Step 1: Point the LASER at a bar code label or, for hands-free scanning,
bring the bar code to the laser beam. The distance from the
MS941 laser to the bar code should be approximately 1 to 5
inches.
**CAUTION**
ALTHOUGH THE LIGHT EMITTED FROM CLASS II LASERS IS NOT
CONSIDERED HAZARDOUS, AVOID STARING DIRECTLY INTO
THE LIGHT BEAM. EXTENDED EXPOSURE MAY CAUSE DAMAGE
TO YOUR EYES.
HAND-HELD
SCANNING
HANDS-FREE
SCANNING