Airaid 883-274 User Manual
Page 2
Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951
P/N 790-551 Aerosol Spray
P/N 790-550 Squeeze Spray
13. Slip the Pre-Filter (#15) over the Airaid Premium
Filter.
14. Complete the assembly by installing the Air Box
Top (#2) onto the Cold Air Box using four 1/4-20 x 1”
bolts (#7), 1/4” lock washers (#10), and 1/4”Flat wash-
ers (#9).
11. Secure the rear half of the of the CAB assembly to
the Horizontal brackets using two 1/4-20 x 5/8” bolts
(#6), 1/4” lock washers , and 1/4”Flat washers.
12. Install the Airaid Premium Filter (#1) onto the filter
adapter and tighten the hose clamp.
REV.02.07.14
15. Reinstall the factory covers in the reverse order of
removal. Reconnect the battery terminal and reinstall the
seats.
Notice that the Air inlet is now located outside of the
engine cover.
10. Secure the forward half of the CAB assembly to
the factory bracket from step number Five, using two
M6x1.0x25mm bolts (#8), 1/4” lock washers, and
1/4”Flat washers.
For your Oiled media filter we
suggest using the AIRAID Filter
Tune-Up Kit!
Thank you for purchasing the Airaid Intake System. Contact Airaid @ (800) 498-6951 8:00 AM - 5:00 PM MST week-
days for questions regarding fit or instructions that are not clear to you. Your Airaid Intake System was carefully inspected and
packaged. Check that no parts are missing, or were damaged during shipping. If any parts are missing, contact Airaid. The air
filter element is protected from direct exposure to water and debris; care should be taken not to drive through deep water. WA-
TER INGESTION IS THE DRIVERS RESPONSIBILITY! The air filter is reusable and should be cleaned periodically.