Airaid 200-219 User Manual
Installation instructions
Installation Instructions
For Part Numbers:
200-219
720-472 Airaid Oiled Media Filter
201-219
721-472 SynthaMax Dry Media Filter - Red
202-219
722-472 SynthaMax Dry Media Filter - Black
203-219
723-472 SynthaMax Dry Media Filter - Blue
2007-10 Chevrolet Silverado 2500HD/3500
2007-10 GMC Sierra 2500HD/3500
6.6L V8 Duramax Diesel “LMM”
Component Identification
1.
Airaid Premium Filter
1
2. Airaid Intake Tube
1
3. Cool Air Box
1
4. Urethane Hump Hose
1
5. Weather Strip 25”
1
6.
¼ - 20 x 1/2” Button Head Bolt
4
7.
¼” Flat Washer
7
8.
8-32 x 3/8” Button Head Screw
2
9.
M6 - 1 x 25mm Hex Bolt
3
10.
#72 Hose Clamp
2
1. Disconnect the negative battery cables.
A.) Using a #20 Torx bit remove the two screws and
the Mass Air Flow sensor from the factory intake
tube.
B.) Loosen the hose clamp at the rubber coupler.
C.) Remove the factory filter minder and grommet
and save them for reinstallation in step # 7.
2. Rock the air filter housing back and forth while
lifting up, and remove the factory intake assembly
from the vehicle. There are only grommets holding it
in place.
3. Using a 10mm socket, remove 4 bolts, and remove
the factory air filter mounting plate.
4. Install the Airaid Cool Air Box (CAB) (#3) into the
vehicle as shown, replacing the factory air filter. In-
stall three M6-1 x 25mm bolts (#9), and three flat
washers (# 7) thru the bottom of the CAB and into the
factory captured nuts. Leave the bolts loose for now.
5. Install two #72 hose clamps (#10) onto the urethane
hump hose (#4), and then slip the hump hose onto the
end of the factory turbo intake tube as shown. Leave
the clamps loose for now.
6. Slide the Airaid Intake Tube (#2) into the CAB
first, and then into the hump hose. If needed, the facto-
ry turbo intake tube can be adjusted for proper align-
ment. Next install four 1/4” button head bolts (#6),
and four flat washers (#7) thru the CAB to secure the
Airaid Intake Tube. Now tighten the three bolts at the
bottom of the CAB and the two hose clamps on the
hump hose.
A.
B.
C.
1/4” Button Head Bolts &
Washers
Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.