Airaid 200-185 - Manual

1. Disconnect negative battery cable.
With a 5/16” socket, remove one bolt on the top
of the beauty cover. Set the bolt and the cover
aside for re-installation later. 2. A.) Loosen the hose clamps on both ends of
the factory intake tube. B.) Next loosen the hose
clamp on the Mass Air Flow sensor where it
clamps on the factory airbox. 3. With a screwdriver, pry the factory tube away
from the plastic clamp on the radiator hose, and
remove the tube.
4. Without disconnecting the electrical connect-
or, remove the Mass Air Flow sensor from the
factory airbox, and set it aside. 5. Grab the factory airbox and rock it back and
forth, and remove it from the vehicle. It is only
held in by grommets, no bolts. 6. Remove 5 bolts and remove the factory airbox
mounting plate.
7. Assemble the two Cool Air Dam panels (#2)
and (#3) using the five supplied screws (#12),
washers (#13), and nuts (#14), as shown. 8. Install the filter adapter (#5) into the CAD us-
ing three button head bolts (#9), and washers
(#10).
9. Install the assembled CAD in place of the
factory airbox using four bolts (#11) and wash-
ers (#10). Do not over tighten the bolts.
A.
B.
Installation Instructions
For Part Numbers:
200-185
700-469 Airaid Oiled Media Filter
201-185 701-469 SynthaMax Dry Media Filter - Red
202-185 702-469 SynthaMax Dry Media Filter - Black
203-185 703-469 SynthaMax Dry Media Filter - Blue
2005-06 Cadillac Escalade/ESV/EXT
2005-06 Chevrolet Avalanche 1500
2005 Chevrolet Silverado 1500
2005-06 Chevrolet Tahoe/Suburban 1500/2500
2006 Chevrolet Tahoe (Canadian)
2005-06 GMC Sierra 1500/1500HD/2500HD/3500HD
2007 GMC Sierra “Classic” 1500/1500HD/2500HD/3500HD
2005-06 GMC Yukon/Yukon XL 1500/2500
4.8L V8, 5.3L V8, 6.0L V8
With Electric Cooling Fan & Low Profile Hood
Component Identification
1. Airaid Premium Filter 1
2. MAF Panel Coated 1
3. Rear Air Dam Coated 1
4. Modular Intake Tube 1
5. Black Filter Adapter 1
6. Urethane Hump Hose 1
7. Urethane Coupler 1
8. Weather Strip 19 1/2” 1
9. 1/4”-20x1/2” SS Button Head 3
10. 1/4” Flat Washer 7
11. M6-1x25 Hex Bolt 4
12. 6-32 x 5/16” Screw 5
13. #6 Flat Washer 5
14. 6-32 Keps Nut 5
15. #60 Hose Clamp 2
16. #64 Hose Clamp 2
Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.