Airaid 200-145 - Manual

Component Identification
1. Airaid Premium Filter 1
2. Rear Air Dam Coated 1
3. MAF Panel Coated 1
4. Air Filter Adapter 1
5. Airaid Intake Tube 1
6. Urethane Hump Hose 1
7. GM Coupler 1
8. Weather Strip 20” 1
9. 6-32 x 5/16” Screw 5
10. #6 Flat Washer 5
11. 6-32 Keps Nut 5
12. ¼-20 x ½” Button Head Bolt 3
13. ¼” Flat Washer 7
14. M6-1x25 Hex Bolt 4
15. #60 Hose Clamp 2
Installation Instructions
For Part Numbers:
200-145
700-469 Airaid Oiled Media Filter
201-145 701-469 SynthaMax Dry Media Filter - Red
202-145 702-469 SynthaMax Dry Media Filter - Black
203-145 703-469 SynthaMax Dry Media Filter - Blue
2002-06 Cadillac Escalade/ESV/EXT
2002-06 Chevrolet Avalanche 1500
1999-06 Chevrolet Silverado 1500
2001-06 Chevrolet Silverado 1500HD/2500HD/3500HD
2000-06 Chevrolet Tahoe/ Suburban 1500/ Suburban 2500
1999-06 GMC Sierra 1500
2001-06 GMC Sierra 1500 HD/2500 HD/3500
2000-06 GMC Yukon/Yukon XL 1500/Yukon XL 2500
2007 GMC Sierra “Classic”/Chevrolet Silverado “Classic”
4.8L V8, 5.3L V8, 6.0L V8 With Mechanical Cooling Fan
and Low Profile Hood
1. Disconnect the negative battery cable.
Loosen the hose clamps located at the Mass Air
Flow (MAF) sensor , and thr ottle body on the
factory intake tube assembly. 2. Disconnect the MAF sensor wiring harness
and remove the sensor from the factory intake
tube. 3. Using a flat head screwdriver, gently pry the
radiator hose bracket from the factory intake
tube assembly and remove the intake tube from
the vehicle.
4. Rock the factory air box back and forth and
remove it from the vehicle. There are only
grommets holding it in, no bolts. 5. Using a 10mm socket, remove the five bolts that
secure the factory air filter housing platform and
remove it. 6. Assemble the Airaid Cool Air Dam pan-
els (#2, #3) using five 6-32x 5/16” screws
(#9),
#6 flat washers (#10), and 6-32 keps
nuts (#11).
MAF Sensor
Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.