Airaid 200-267 - Manual

2007-08 Chevrolet Silverado 1500/2500/3500
Tahoe/Suburban/Avalanche/
GMC Sierra 1500/2500/3500
Yukon/Yukon XL
Denali/Denali XL
Cadillac Escalade/ESV/EXT
4.8L, 5.3L, 6.0L, 6.2L V-8
*New Body Style GMT-900 Only*
*With Electric Cooling Fans Only*
Component Identification
1. Airaid Premium Filter 1
2. Airaid Intake Tube 1
3. Cold Air Box 1
4. Air Filter Adapter 1
5. Urethane Hump Hose 1
6. Urethane Coupler 1
7. 3/8” x 14” Breather Hose 1
8. Weather Strip 25” 1
9. 1/4 - 20 x 1/2” Button Head Bolt 3
10. 1/4” Flat Washer 3
11. #64 Hose Clamp 4
12. 1/4” NPT x 3/8” Barb Fitting 1
13. Edge Clip Cable Tie 1
1. Disconnect the negative battery cable.
Remove the factory engine cover by lifting up on
the front, and then pulling the cover towards the
front of the vehicle. It is only held in place with
grommets. 2. Disconnect the factory breather hose at the
valve cover. 3. Separate the factory intake tube from the plas-
tic clamp that secures the radiator hose to the
tube. A firm downward push will usually do it.
4. Loosen three hose clamps. One at each end of
the factory intake tube, and one on the Mass Air
Flow sensor (MAF) wher e it clamps to the fac-
tory airbox. 5. Slide the factory intake tube off of the MAF
sensor, rotate it up so that it disengages from the
mounting grommet on the intake manifold, and
then slide it forward off of the throttle body and
remove it from the vehicle. 6. Remove, and set aside the MAF sensor from
the factory airbox using caution to retain the fac-
tory clamp and seal.
7. Rock the factory airbox back and forth to loos-
en it from the mounting grommets, and remove it
from the vehicle. 8.Using a 10mm socket, remove four bolts, and
then remove the factory airbox mounting plate
from the vehicle and set aside. Three of these bolts
will be reused in step 11. 9. Install the Filter Adapter (#4) onto the Cold Air
Box, or CAB (#3), as shown using the thr ee 1/4
-20 Button Head Bolts (#9) and 1/4” Washers
(#10).
Installation Instructions
For Part Numbers:
200-267
720-472 Airaid Oiled Media Filter
201-267 721-472 SynthaMax Dry Media Filter - Red
202-267 722-472 SynthaMax Dry Media Filter - Black
203-267 723-472 SynthaMax Dry Media Filter - Blue
Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.