Airaid 200-146 User Manual
Installation instructions
Installation Instructions
For Part Numbers:
200-146
700-469 Airaid Oiled Media Filter
201-146
701-469 SynthaMax Dry Media Filter - Red
202-146
702-469 SynthaMax Dry Media Filter - Black
203-146
703-469 SynthaMax Dry Media Filter - Blue
2003-07 Hummer H2/H2 SUT
6.0L V8
Component Identification
1.
Airaid Premium Filter
1
2.
Airaid MAF Panel
1
3.
Airaid Bottom Panel
1
4.
Filter Adapter
1
5.
Modular Intake Tube
1
6.
Coupler W/ #68 Clamp
1
7.
Urethane Hump Hose
1
8.
Weather Strip 25”
1
9.
¼-20 Button Head Bolt
3
10.
¼” Flat Washer
3
11.
#60 Hose Clamp
2
8. Mount the Airaid Premium filter (#1) onto the
filter adapter and secure with the hose clamp.
9. Position the Airaid system over the three
factory mounting points & secure with the
three saved factory bolts removed in step #4.
6. Align Cool Air Dam panels (#2, #3) & fasten
together with saved grommets and bushings
from step #4. Install the filter adapter (#4) using
the 3 provided button head bolts (#9) and wash-
ers (#10).
4. Remove the three factory air box hold
down bolts, bushings, and grommets. Save
them for the Airaid installation.
5. Remove the factory air box assembly from
the engine compartment.
SAVE
Three Bolts
Total
1. Disconnect negative battery cable.
Remove the factory filter minder and rubber
grommet from the factory intake tube, retain
for re-installation later in the install.
2. Loosen the recessed bolt and remove the
beauty cover. Loosen the factory hose clamps
on each end of the factory intake tube and re-
move it from vehicle.
3. Loosen the Mass Air Flow sensor hose
clamp. Remove the MAF sensor from the fac-
tory air box and temporarily set it aside. Use
caution to retain the factory coupler & hose
clamp on the MAF.
MAF Clamp
7. Install the weather strip (#8) onto the top of
the Airaid Cool Air Dam. (Hint: for easier in-
stallation start at one end or the other, not in the
middle).
Clamps
Bolt
Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.