Airaid 450-327 User Manual
Page 2
Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951
Thank you for purchasing the Airaid Intake System. Contact Airaid @ (800) 498-6951 8:00 AM - 5:00 PM MST
weekdays for questions regarding fit or instructions that are not clear to you. Your Airaid Intake System was carefully
inspected and packaged. Check that no parts are missing, or were damaged during shipping. If any parts are missing,
contact Airaid. The air filter element is protected from direct exposure to water and debris; care should be taken not to
drive through deep water. WATER INGESTION IS THE DRIVERS RESPONSIBILITY! The air filter is reusable and
should be cleaned periodically.
13. Remove the protective film from the Lid and Win-
dow before installation. Install the Airbox lid and Win-
dow onto the Airbox, with the Window on top, using 6
sets of 1/4” Button Heads. and Washers.
11. Reconnect the breather hoses to the Fittings in the
Airaid Intake Tube.
12. Install the Airaid Premium Filter onto the Filter
Adapter inside of the Airbox
14. Double check your work. Make sure all clamps,
hoses, bolts, and screws are tight. Double check the
hood clearance. Reconnect the negative battery cable
and reinstall the cover.
Synthamax Air Filters do not require oil. Service air filter as needed by clean-
ing with common non-petroleum all-purpose household cleaner and water.
Simple Green®, Formula 409® or equivalent works great. Apply cleaner to
outside of air filter and allow to soak. Then flush filter clean from the inside
out with a garden hose and repeat steps if necessary. Do not apply high pres-
sure water or air to clean filter. Allow filter to air dry and reinstall.
For your Oiled media filter we suggest using
the AIRAID Filter Tune-Up Kit!
10. Insert the Intake Tube into the Hump Hose and Re-
ducer then tighten all 4 Intake Clamps.
REV 04.14.15
Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to
find your part number, and click View Details.