beautypg.com

Airaid 310-276 User Manual

Installation instructions, Component identification, Tab grommet

background image

Installation Instructions

For Part Numbers:

310-276

700-458 Airaid Oiled Media Filter

311-276

701-458 SynthaMax Dry Media Filter - Red

312-276

702-458 SynthaMax Dry Media Filter - Black

313-276

703-458 SynthaMax Dry Media Filter - Blue

2007-2011 Jeep Wrangler
3.8L V6

2. Disconnect the air temp sensor in the factory intake.
loosen the clamps on both ends of the tube and remove
it from the vehicle.

3. Disconnect the crankcase breather line from the top of
the airbox. Remove the entire airbox as an assembly by
unseating it from the mounting grommets in the inner
fender and lifting upward.

4. Install the Air Scoop Bracket (#4) into the Cold Air
Box as shown by using four 1/4-20 x 5/8 Hex Bolts
(#11), 1/4” Flat Washers (#12), and 1/4” Nylock Nuts
(#13).

5. Depress the locking tabs holding the factory air
scoop in the lower half of the airbox and remove it.

6. Transfer the factory air scoop into the Air Scoop
Bracket on the Airaid Cold Air Box.

8. Install the 1/2” Grommet (#16) into the Airaid Intake
Tube (#2).
Transfer the factory air temp sensor from the OEM tube
into the grommet in the Airaid Intake Tube.

7. Replace the factory airbox grommets in the inner
fender area with the three 3/8” Well Nuts (#15).

9. Create the intake assembly by joining the Airaid Intake
tube to the Cold Air Box using two sets of 1/4-20 Button
Head Bolts (#10) and 1/4” Flat Washers (#12).

1. Disconnect The Negative Battery Terminal! It’s
recommended to allow the engine to fully cool down
before starting the intake installation.

Component Identification

1

.

Airaid Premium Filter

1

2. Intake Tube

1

3. Cold Airbox

1

4. Air Scoop Bracket

1

5. Silicone Hump Hose

1

6. Airbox Lid

1

7. Airbox Lid Gasket

1

8.

#52 Hose Clamp

1

9.

#44 Hose Clamp

1

10.

¼-20 x 1/2” Button Head Bolt 6

11.

1/4-20 x 5/8L Hex Bolt

4

12.

1/4” Flat Washer

10

13.

¼” Nylon Lock Nut

4

14.

3/8-16X1.5in. Bolt

3

15.

Well Nut, 3/8-16

3

16.

1/2”Grommet

1

17.

#19 Speed Clamp

1

TAB

Grommet

Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.

This manual is related to the following products: