Airaid 310-212 User Manual
Installation instructions
Installation Instructions
For Part Numbers:
310-212
700-539 Airaid Oiled Media Filter
311-212
701-539 SynthaMax Dry Media Filter - Red
312-212
702-539 SynthaMax Dry Media Filter - Black
313-212
703-539 SynthaMax Dry Media Filter - Blue
2011-14 Dodge Durango
2011-14 Jeep Grand Cherokee
3.6L V6, 5.7L V8
2. A) Loosen the hose clamp on the air box side of the
factory intake tube. B) Disconnect the crankcase
breather line from the airbox lid.
3. Using a standard head screwdriver, carefully pry and
separate the hose anchor from the airbox lid. This anchor
will be reused on the Airaid Intake System.
4. Remove the upper half of the airbox and the factory
air filter.
5. Carefully separate the hood seal from the cleat on the
airbox inlet. Pull gently from side to side to avoid tear-
ing the seal.
6. Unseat the lower half of the factory airbox from it’s
mounting grommets and remove the airbox and air inlet
duct as an assembly.
8. Join the Panels together using the ten, 8-32 Thread
Cutting Screws (#11).
7. Fit the Front and Rear Panels (#2 and #3) together as
shown with the tabs on the inside.
9. A.) Install the Rubber bumper (#12) into the small
hole in the panel assembly.
B.) Tr ansfer one of the factor y air box gr ommets into
the large hole in the Panel as shown.
A.
B.
Component Identification
1. Airaid Premium Filter
1
2. Rear Panel
1
3. Front Panel
1
4. Weather Strip 22”
1
5. 1/2”x13” Breather Hose
1
6.
Mounting Bracket
1
7.
1/2”x90deg. Elbow
1
8.
¼-20 Button Head Bolt
2
9.
¼” Flat Washer
2
10.
1/4-20 Flange nut
2
11.
8-32 Thread Cutting Screw
10
12.
Rubber Bumper
1
NOTE: These instr uctions depict an installation being
performed on a Jeep Grand Cherokee 5.7l and is meant to
be a guide for all other makes and models listed. While
some details may vary from vehicle to vehicle, the general
install procedure remains the same.
Disconnect The Negative Battery Terminal!
1. Remove the engine cover.
A
B
Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.