Airaid 300-192 - Manual

3. Remove the factory air cleaner. 4. Install the Quick Fit Panel (#2) by slipping it into the fac-
tory intake tube, and then sliding it over the tabs on the facto-
ry airbox base. Adjust it for fit on top of the airbox base, and
re-latch the 4 clips to hold the Quick Fit Panel securely in
place.
Installation Instructions
For Part Numbers:
300-192
700-445 Airaid Oiled Media Filter
301-192 701-445 SynthaMax Dry Media Filter - Red
302-192 702-445 SynthaMax Dry Media Filter - Black
303-192 703-445 SynthaMax Dry Media Filter - Blue
2006-08 Dodge Ram 1500/2500/3500
3.7L V6, 4.7L V8, 5.7L V8
Component Identification
1. Airaid Premium Filter 1
2. Cool Air Dam 1
3. Weather Strip 32 3/4” 1
4. Speed Clamp 1
2. Unlatch 4 clips that hold down the factory airbox lid.
Loosen the hose clamp on the factory intake tube where it
connects to the airbox lid, then remove the lid. 1. Disconnect the negative battery cable!
Disconnect the factory breather hose from the air cleaner lid.
Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.