ACTi NVR 3 Corporate - Manual (Page 55)

www.acti.com
NVR 3 Corporate System Administrator ’s Manual
55
check the Camera List on the left of Setup page  Cameras tab to see if the camera name
has been removed from the tree.
Copy Settings Across Cameras
When setting a large number of cameras, many settings will resemble other ones, and it is
sometimes tiresome to repeat every setting again and again. You can use the Copy function to
save the hassle of needless repetition.
1. On Camera List , select the source camera
whose settings are to be copied from. You
can select only one camera to be the source.
2. Click “ Copy ” to bring up the copy setting
window.
3. On the window, below the source device
name are the settings you may choose to
copy, including Basic Settings , PTZ
Settings and Video Settings .
4. Click “ Apply ”, the settings will be written to
target cameras.
5. To add a new camera with the same settings,
choose “ Add Camera ” in Target Camera
area, and then click “ Apply ” to go to a new device page. Each field on this page has
already been filled with the source camera ’s properties. You may continue to modify the
Camera Name , IP Address , get the live view by clicking “ Get Device Settings ”, and then
click “ Apply ” to add this camera to Camera List .
6. There are a few differences of the copied items between two target camera types: