ACTi NVR 3 Corporate - Manual (Page 48)

www.acti.com
NVR 3 Corporate System Administrator ’s Manual
48
Click “Get Device Settings” to have NVR contact the camera and get the
connected to the camera, NVR will get all the camera properties like
Camera Serial Number, Firmware Version. If the camera supports dual
configuration fields (Default Live View Stream, Enlarged Live Stream and
Stream) will be revealed, and you may set different stream types for live
recording (to configure individual stream format, please refer to
2. Configure Video Format on page 57). Click on “ Apply ” to save this camera or “ Cancel ” to
abort it.
3. To directly access the camera configurator webpage, simply click “ Web Configurator ” on
the top right to open it. Certain detailed settings can only be accessed through the web
configurator and not through NVR.
Basic Settings Attributes
Field Name Description
Media Type Select the media type of the camera, choosing either “Standard” or
“ONVIF” . By default, the setting is “ Standard ”, which enables full
function-wise support for ACTi cameras capabilities. To connect with
an other-brand camera using ONVIF, please make sure the camera
Important Notice
If any of the required fields is incorrect, NVR will not be able to connect the device. When you
have any device connection problem, please check these settings. However, at this point, you
may skip filling in the
Device Name , Brand, Model , and Stream Mode configuration.
Click on the stream name to display the live stream of a dual stream/multi-streaming
device.