ACTi NVR 3 Corporate - Manual (Page 45)

www.acti.com
NVR 3 Corporate System Administrator ’s Manual
45
3. There are three ways to add cameras into the
system, Search Cameras , Search ONVIF
Cameras , and Add Cameras Manually.
● Use Search Dev Cameras ices to auto
search ACTi cameras located in the same
subnet as your NVR server.
● Use Search ONVIF Cameras to find
cameras that support ONVIF in the same
subnet as your NVR server.
● If your cameras/video encoders are
located outside of a local subnet or over WAN, add them to your NVR server by using the
Add Cameras Manually button. You will need to know the IP address of the camera to
add it manually.
Search Cameras Within Local Area Network
1. Select “ Search Cameras ”. Once the search is completed, a list of the cameras in your
LAN will be shown. Click on the title header to sort by that column. Click on the header
again to sort in reverse order . For faster search, you may type a specific IP address or a
part of the IP address in IP Filter as a filter and click to narrow down the search
result.
A. Account/Password text box B.
Titl
e
IP filter (for multiple networks)
C. “Refresh” button D. Available / Total Licensed Channels
E. Search result F. “Apply” button
C
A
F
E
D
B
Available / Total Licensed Channels