Add non-acti cameras, Nvr 3 corporate system administrator ’s manual – ACTi NVR 3 Corporate User Manual
Page 51
NVR 3 Corporate System Administrator
’s Manual
Add Non-ACTi Cameras
In this section, we will guide you through how to add cameras to NVR 3 system.
After the required CDP license is activated, please:
1.
Use the utility provided by camera manufacturer to confirm the camera properties:
(1)
Protocol
, (2)
IP Address
, (3)
HTTP Port
, and (4)
User Name
&
Password
.
2.
Log in to NVR, go to
Setup
page
“
Devices
” tab, click “
Add
”, and select “
Add Camera
Manually
”.
3.
After selecting
“Add Camera Manually
”, the camera settings page will appear as below.
Please fill in the
eight
marked fields shown below that are required to communicate with
the camera -
Media Type
,
Protocol
,
IP Address
,
Brand, Model, HTTP Port
,
Acount
,
and
Password
, and then click “
Apply”.