ACTi NVR 3 Corporate - Manual (Page 52)

www.acti.com
NVR 3 Corporate System Administrator ’s Manual
52
If the camera you want to add supports ONVIF, you can select “ONVIF” for Media Type ,
and the settings page will appear as below. Please fill in the five marked fields shown
below that are required to communicate with the camera - Media Type , Camera IP , HTTP
Port , Account , and Password , and then click “ Apply”.
4. By applying the settings, the NVR server will get the video stream, and the camera will be
successfully added to the NVR 3 system. You may click Video, PTZ, or Preset Tour
(available for cameras with pan/tilt/zoom capabilities) tabs to configure other properties.
To directly access the camera via webpage, simply click “ Web Configurator ” on top left to
open it. Certain advanced settings are only available through the camera ’s web interface
and not through NVR.