beautypg.com

Nvr 3 corporate system administrator ’s manual – ACTi NVR 3 Corporate User Manual

Page 49

background image

www.acti.com

NVR 3 Corporate System Administrator

’s Manual

49

camera supports ONVIF.

Name

Enter the name of the camera, which will be shown in the

Camera

list

on the left in Live View. This name should be descriptive so that you

know where the camera is located.

Brand

Select the manufacturer of this camera.

Model

Select the camera model of the IP cameras / video servers. This is

automatically filled in after you perform

Get Device Settings

for ACTi

cameras.

IP address

Enter the camera

’s IP address or host name.

HTTP Port

Enter the HTTP port for IP cameras/ video servers. Most cameras

use the default port number 80.

RTSP Port

This field is revealed as Protocol is "

RTP/RTSP TCP

" or "

RTP/RTSP

UDP

" or

"RTP/RTSP HTTP

".

Stream Mode

*

1

Select one of the streaming modes this camera supports.

Protocol

Select a streaming protocol to connect the camera with.

Account

Enter the user name to access the camera.

Password

Enter the password to access the camera.

Channel No.

*

2

The channel ID you set for a stream of a multi-streaming camera.

Default Live View

Stream

*

3

Choose the stream for Live View.

Enlarged Live View

Stream

*

3

Choose the stream for 1x1 Live View layout. You can have a channel

automatically switch to the stream of higher clarity once this channel

is enlarged to 1x1 layout by your double-click or View Patrol.

Recording Stream

*

3

Choose the stream for recording.

Connection

Timeout(0~99 secs)

Enter length of time allowed for a camera to respond to NVR. If the

response is to late as to exceed this time, NVR will consider this

camera

“disconnected”. We recommend you to set different values

for different types of connection. The default setting is 5 seconds. For

cameras located over the WAN, you may wish to increase this value

to allow for occasional Internet lags.

*

1

Available when NVR is connected to a multi-streaming device.

*

2

Available when NVR is connected to a device that is concurrently in multi-streaming mode (Dual

Stream mode excluded).

*

3

Available when NVR is connected to a multi-streaming device in Dual Stream mode

.

Note

Current NVR version does not support ePTZ operation of 6VGA streaming mode. Please define 6
VGA views through camera web configurator.

This manual is related to the following products: