ACTi NVR 3 Corporate - Manual (Page 133)

www.acti.com
NVR 3 Corporate System Administrator ’s Manual
133
Step 2: Remove NVR Server Program Folder (Optional)
If you are performing a complete un-installation without leaving any NVR server related data
on the current computer, you may consider deleting this folder.
After un-installation, the NVR 3 system folder will remain under ACTi product folder ACTi
Corporation on your hard drive, the system configuration data here will not be removed until
you delete them manually. By default, the path of NVR 3 system folder is C:\Program
Files\ACTi Corporation .
However, keeping this folder is convenient for a un-installation followed by an instant
re-installation, for the previous system settings can directly be applied to the new server.
Step 3: Remove the Recordings Folder (Optional)
Remove the whole Recordings folder(s) that saves the recorded video files on storage hard
drive(s). If you selected multiple storage hard drives via Setup page  Storage tab  “ Disk
Drive List ”, then the server may have generated one Recordings folder under each selected
drive. If you have renamed the folders or change the locations, please make sure you find the
correct path.
NVR 3 Program Folder
The Recordings folder contains
all the video raw files saved in
individual channel subfolders.