Add cameras on wan or other local area networks, Nvr 3 corporate system administrator ’s manual – ACTi NVR 3 Corporate User Manual
Page 47
NVR 3 Corporate System Administrator
’s Manual
Add Cameras on WAN or Other Local Area Networks
1.
After selecting
“Add Camera Manually
”, the camera settings page will appear as below.
The most important settings are (1)
Media Type
, (2)
Protocol
, (3)
IP Address
, (4)
HTTP
Port
, and (5)
User Name
&
Password
. Please fill in these required fields for NVR to
communicate with the camera.
If the camera you wish to add supports ONVIF, you can select
“
ONVIF
” for
Media Type
,
and the settings page will appear as below. The most important settings are (1)
Media
Type
, (2)
Camera IP
, (3)
HTTP Port
, and (4)
User Name
&
Password
. Please fill in
these required fields for NVR to communicate with the camera.
Important Notice
1.
For certain non-ACTi cameras, you may need to configure the ONVIF user credentials of
the camera by accessing its Web Configuration page and managing the ONVIF Users List.
2.
Functions supported for cameras added through ONVIF will depend on the camera
capabilities.