ACTi NVR 3 Corporate - Manual (Page 54)

www.acti.com
NVR 3 Corporate System Administrator ’s Manual
54
Manage Multiple Cameras
After adding several cameras to the system, you may get an overview of all cameras on Setup
page Devices tab; this is where you may use certain fast and convenient approaches to
manage a number of cameras. In this section, we will guide you through how to quickly add or
delete multiple cameras.
Modify Basic Connection Settings
Go to Setup page  Devices tab, and click All Cameras in Camera List to get the cameras
overview in right column. Each basic connection setting field including Name, IP Address,
HTTP Port, User Name and Password, is editable. Simply click in the field to modify it directly.
Every time you modify a property without saving it, an icon will
appear next to the camera in Camera List . You may click “ Reset ” to
retrieve the settings you saved last time once you want to abort
current modificaiton. After changing any field, please remember to
click “ Apply ” before you leave this page.
Delete Cameras
You may delete a single, multiple or all cameras on All Cameras List .
The logs and video files of the cameras will be kept until deleted by
server storage deletion rule. Select the camera(s) you wish to delete,
click “ Delete ” button and confirm the deletion. If you want to delete all
the existing cameras, simply click on upper right to select
them all at once. To validate if you have successfully deleted a camera on NVR system, simply
Tip
NVR will sync with devices upon connecting to them. To make sure the settings on NVR side
are prior to and always overwrite those on device sides, please check “ Auto save NVR settings
into devices upon connection ”.