Welltech WG5290 User Manual
Page 78
Welltech Computer Co., Ltd.
WellGate 5290 User Guide – V6.1
- 78 -
Figure 7.10-2
• IP Network: IP Address or prefix used to be filtered
• Access
Mode:
o
Allow: the inputs IP Network are allowed for calls.
o
Disallow: The inputs IP Network are disallowed for calls.
• Account Code: Account Code is part of called number prefix. It can be
used for billing purpose. Account Code can be retrieved by call flow
editor and make it for RADIUS billing user.
• Customer Name: Name of this item
• Default: If there is no Account prefix code can match, this default item
(account code) will be used
• Remove Account Code: Remove Account Code from the DNIS (called
number)
• ANI ACL: If it is enabled, only ANI is matched the ANI ACL group can
be allowed to use.
• Add Prefix: Add the prefix to the DNIS (called number)
• Max concurrent call: The maximum concurrent calls can be allowed for
this IP item.
☻Note: If in the system has both allowance and disallowance setup, the
system will check allowance first and disallowance later. If only
disallowance inputted, all IP will allow to work except disallowed
network. If only allowance inputted, only those IP from
allowance list will work.
ANI ACL
Calling Number Screening
Start Path: Configuration>Access Control>ANI ACL
Click New to create an ANI ACL list group