Welltech WG5290 User Manual
Page 69
Welltech Computer Co., Ltd.
WellGate 5290 User Guide – V6.1
- 69 -
o
FRF11 Fax Relay (Propriety mode): FRF11 Fax Relay (propriety
mode)
• Fast Connect Mode: Connection of H.323 call fast mode
o
Disable: Don’t use Fast Start.
o
Enable Fast Start Both Site: Use Fast Start for incoming call and
outgoing H.323 calls
o
Fast Start-H.323 incoming only: Enable Fast Start for H.323
incoming calls only
o
Fast Start-H.323 outgoing only: Enable Fast Start for H.323
outgoing calls only.
o
Early H.245: Use Early H.245
• H.245 Tunneling: Transfer the H.245 message over the Q.931 channel
• FS Enable 1-6 (Codec Priority 1-6): Enable Fast Start codec selection
for each codec
• Inbound DM Group: Digit Manipulation Group for H.323 incoming calls
• Outbound DM Group: Digit Manipulation Group for H.323 outgoing
calls
Advance H.323 Configuration:
Start Path: Configuration>H.323 >Advance
Figure 7.7-2
Advance Parameter Description:
• RAS Multicast IP: RAS multicast IP for Gatekeeper searching
• RAS Multicast Port: RAS multicast Port for Gatekeeper searching
• Max Call: The maximum H.323 calls
• Max Channel: The maximum channel of each H.323 call
• RAS Port: Local RAS port (default: 1719)
• Q.931 Port: Local TCP port number of Q.931