Welltech WG5290 - Manual (Page 68)

Welltech Computer Co., Ltd.
WellGate 5290 User Guide – V6.1 - 68 -
- All Channel: Reset all channel
- 0~31: Reset 0~30 logical channel to reset
H.323 Configuration
Start Path: Configuration>H.323
Figure 7.7-1
Basic Parameter Description:
• Register To Gatekeeper: Register to Gatekeeper or not
o
Yes: Register to GK
o
No: Not register to GK
• Gatekeeper IP: Gatekeeper IP Address
• Gatekeeper RAS: UDP Port number listened on Gatekeeper (default:
1719)
• E.164 Tel: Telephone number to be registered to Gatekeeper
• Register H.323 ID: H.323 alias name to be registered to Gatekeeper
• Register Time To Live (sec): The registration maximum time to live
setting when registered to the Gatekeeper
• Response Timeout (Q.931)(sec): The maximum time to wait for
response from sending call setup signal out
• Connect Timeout (Q.931)(sec): The maximum time to wait for
connection (answer) from dialing out the destination number
• DTMF Relay: DTMF transfer type selection
o
RTP relay (RFC 2833): DTMF relay via RTP packet (RFC2833
standard)
o
DTMF transparent: transmitter DTMF over voice channel
o
H.245 Signal input: DTMF relay via H.245 user signal input
o
H.245 Alphanumeric: DTMF relay via H.245 Alphanumeric signal
o
Q.931 User Information: DTMF relay via Q.931 User to user
information
• Fax Transport: Fax transport type selection
o
Transparent mode: Transparent mode (by voice packet)
o
T.38 Fax Relay (H.245 mode): T.38 Fax relay (H.323 Annex D)
o
T.38 Fax Relay (Propriety mode): T.38 Fax Relay (propriety mode)