Welltech WG5290 - Manual (Page 15)

Welltech Computer Co., Ltd.
WellGate 5290 User Guide – V6.1 - 15 -
Chapter 2 Logon WellGate 5290
After connected E1/T1 & Ethernet cables into the WellGate 5290,
turned on the power. The first step is to logon the system and set up the IP
address.
Before you can use the Browser to config WellGate 5290, you need to
have Java Standard Runtime (1_4_1_02) to make it work. Please refer to
Appendix 2 Java plug-in Install for detail.
Logon WellGate 5290
Setp1: Start IE5.0 (or later version) to navigate WellGate 5290 Management
System by typing the default IP addresses (the default URL is
http://192.168.111.111:10087). The screen will display User ID and
Password as figure 2.1-1.
Figure 2.1-1
☻Note: The default network IP address is 192.168.111.111 and subnet
mask is 255.255.255.0
Step 2: Enter log user name and password (the default user id is root and
user password is root). You can manage your user account via web
(refer to Section “
Account Manager ”) later.
Figure 2.1-2
Step 3: The screen shows the Home Page of WellGate 5290 as figure 2.1-3.