Welltech WG5290 - Manual (Page 67)

Welltech Computer Co., Ltd.
WellGate 5290 User Guide – V6.1 - 67 -
required by the standard(i.e., it is optional only ), and no Channel-id
was specified in the establishment request. This is useful to
increase compatibility with switches that require it. On PRI lines it
indicates a not yet used channel id, preferred only.
o 0x00000200: When this bit is set, ISDN Stack sends G..711 A-Law
in outgoing voice calls. When this bit is cleared, ISDN Stack sends
default G.711-Mu-Law in outgoing voice calls. Applicable for 5ESS
variant(T1).
• Trans Cap: Transfer Capability
o
Voice Service
o
Data Service
o
Modem Service
• Call ID Transfer Type: Call ID transfer type
o
Disable Caller ID: default parameter
o
Transparent Caller ID
o
Relay Caller ID
o
Bypass Caller ID
Reset Configuration
Reset a specified channel or full trunk.
Start Path: Configuration>Interface>Detail>Reset
Figure 7.6-1
Start Path: Configuration>Interface>Detail>Reset
Figure 7.6-2
Basic Parameter Description:
• Trunk: Reset trunk ID
• Channel: Rest channel selection