Welltech SIPPBX 6200A - Manual (Page 95)

3.4.6 Music Upload
You can customize Ring Back Tone (Transferring Tone) by uploading new wave file on
SIPPBX 6200A. Please record wave file format as
PCM, Channel Mode: Mono, Frequency:
8K, Bit Rate: 16 bits. And the file size must less than 10M .
Click Management, and then click the Music Upload table. The screen appears as
shown.
Figure Management: Music Upload
The following table describes the table in this screen
Table Management:
Music Upload
Label Description
Hold Tone/Ring Back
Tone Select this option to upload SIPPBX 6200A Hold Tone/Ring Back
Tone file from your computer. The default is Application.
Music Upload
File Name Choose the file name of your IVR file (wave).
File Type in the location of the file you want to upload in this field or
click on the Browse button to find it.
Browse Click Browser to find the file you want to upload.
Apply Click on the Apply button to begin the upload process. This
process may take up to two minutes.
Cancel Click on the Cancel button to begin configuration this screen
afresh.
Note:
z After Uploading successfully, on screen will show related information. Please reboot
system to renew settings.
- 95 -