Welltech SIPPBX 6200A - Manual (Page 84)

modified.
Network Routing Table (IPV4)
Select Select this check box, then modify or delete it.
Destination This field shows the IP address.
Network This field shows the Subnet Mask address.
Gateway This field shows the Default Gateway address.
Add Click on the Add button, then display Network Route screen.
Modify IP address can be modified by clicking on the checkbox next to
the IP address and click on the Modify button.
Delete IP address can be deleted by click on the checkbox next to the
IP address and click on the Delete button.
Apply Click on the Apply button to save your customized settings and
exit this screen.
Cancel Click on the Cancel button to begin configuration this screen
afresh.
Click Add/Modify. The screen appears as shown.
You can add or modify a network routing record. Input subnet as Destination, subnet mask
as Net mask, and gateway as Gateway.
Figure Management: Network Routing
The following table describes the table in this screen
Table Management:
Network Routing
Label Description
IP Address Enter the IP Address.
Subnet Mask Enter the Subnet Mask Address.
Default Gateway Enter the Default Gateway Address.
Apply Click on the Apply button to save your customized settings and
exit this screen.
Cancel Click on the Cancel button to begin configuration this screen
afresh.
- 84 -