Welltech SIPPBX 6200A - Manual (Page 59)

3.1.8 Outgoing Routing
Outgoing Call Rule means from subscriber (Extension or Trunk registered on SIPPBX
6200A) to call out.
To change your Outgoing Call Routing, click Configuration, and then click the Outgoing
Routing table. The screen appears as shown.
Figure Configuration: Outgoing Call Routing
The following table describes the table in this screen
Table Configuration: Outgoing Call Routing
Label Description
Select Select this check box, then modify or delete it.
Prefix This field shows the Prefix information
Digits Length This field shows the Digits Length information
Destination This field shows the Destination information
Add Click Add to Add Outgoing Routing Setting Screen.
Modify Click Modify to Modify Outgoing Routing Setting screen.
Delete Click Delete to select list.
Add Click on the Add button, then display Outgoing Routing screen.
Modify A prefix can be modified by clicking on the checkbox next to the
prefix and click on the Modify button.
Delete A prefix can be deleted by clicking on the checkbox next to the
prefix and click on the Delete button.
Total Count This field shows Total Count information.
Number Search Enter the search number, then click enter key. The screen will
display matched search data.
Total Page This field shows Total Page information.
Page This field shows Page Number information. You can Enter page
number, then click enter key. The screen will display this page
- 59 -