Welltech SIPPBX 6200A - Manual (Page 56)

3.1.7 SIP Trunk Reg.
SIP Trunk is for SIPPBX 6200A to register to other systems only, such as ITSP or another
SIPPBX 6200A.
On screen of SIP Trunk will show all of the sets of SIP Trunks. You will find out the
registered Account and registered server IP address, port number, Realm and the Register
Status. User can press Add New to add new Trunk or Modify to configure the specified SIP
Trunk. Press Delete will delete the specified SIP Trunk.
To change your SIP Trunk Setting, click Configuration, and then click the SIP Trunk
Setting table. The screen appears as shown below.
Figure Configuration: SIP Trunk Setting
The following table describes the table in this screen
Table Configuration: SIP Trunk Setting
Label Description
Select Select this check box, then modify or delete it.
Line Number This field shows the Line Number information
Account This field shows the Account information
IP Address/DNS This field shows the IP Address/DNS information
Port This field shows the Port information
Status This field shows the Status information
Add Click on the Add button, then display SIP Trunk Setting screen.
Modify A Line Number can be modified by clicking on the checkbox
next to the Line Number and click on the Modify button.
Delete A Line Number can be deleted by clicking on the checkbox next
to the Line Number and click on the Delete button.
Total Count This field shows Total Count information.
Number Search Enter the search number, then click enter key. The screen will
display matched search data.
Total Page This field shows Total Page information.
Page This field shows Page Number information. You can Enter page
- 56 -